Getting Started; Insert The Batteries; Power On/Off - DNT HSQ2010 Mode D'emploi

Getting started

Insert the batteries

• Slide open the battery cover.
• Place the batteries in the correct polarity as indicated and close
the cover.You may have to reset the time.
• Remove the batteries if you will not be using the HSQ2010
Recorder for an extended period. Leaking batteries may
damage the HSQ2010 Recorder
• If the HSQ2010 Recorder malfunctions, remove the batteries
and reinsert them.
• Stop the recorder before replacing the batteries. Removing
the batteries while the recorder is in use may corrupt the
fi le.
• When the batteries are nearly empty, the battery indicator
blinks.
• If it takes longer than 2 minutes to replace the battery, you
may have to reset the time.

Power on/off

• To power on, press the
HELLO.
• To power off, press the
until the display shows BYE.
button until the display shows
button while the recorder is stopped
- 40 -