Hold Function; Set Date And Time; Display Information - DNT HSQ2010 Mode D'emploi

Hold function

When the HOLD switch is in the Hold position, all buttons on the
device are inactive. On Hold is shown briefl y on the display and
the display turns off. Unlock the HSQ2010 Recorder by moving the
HOLD switch to the Off position.

Set date and time

When the batteries are installed for the fi rst time, you will be promp-
ted to set the date and time.
• CLOCK will be shown on the display. Press the
year indicator fl ashes.
• Press the
• Press the
• Repeat the steps to continue to set the month, day, 12/24-hour
system and the time in the same way.
The date and time can be changed at any time using
the menu. See Customize settings on page 56 for
more information.

Display information

• Press the STOP/DEL button while the recorder is stopped to
rotate the information on the display: total playback time of the
current fi le > time > date > remaining recording time > recording
time of the current fi le > recording date of the current fi le.
• Press and hold
recording time.
or button to set the year.
button to advance to the settings for the month.
during recording to display the remaining
- 41 -
Getting started
button. The