Assembly Instruction - cecotec TIT X-BIKE Guide D'utilisation

ENGLISH
Key Head Bolt M8x50
Allen Key Bolt M8x35
Rigent Wrench
Nº Description
1
Main frame
2 Stabilizer
3 Key Head Bolt M8x50
4 Curved washer
5
Dome Nut
6 Seat
7 Seat post
8 Washer
9
Nut
14
Washer (M(8) Dome Nut (M8)
Rigent Wrench
Screwl M4x25
Knob
1-3 Allen Wrench
QTY Nº Descripción
1 10
Adjusting knob
2 11 Handle bar
4 12 Allen Key Bolt M8x35
6 13 LCD screen Holder
4 14
Screw
1 15 LCD secreen
1 16 Pedal (left)
3 17 Pedal (right)
3 18
Tension Knob

ASSEMBLY INSTRUCTION

QTY
1
1
2
1
1
1
1
1
1
STEP 1
Attach the two stabilizers (2) to the main frame (1) using four
sets of dome nuts (5), curved washers (4) and M8X50 (3) key
head bolts.
STEP 2
Align the seat (6) with the seat post (7). Adjust the angle of the
seat. Fix it tightly with nuts and washers (9, 8).
STEP 3
Insert the seat post (7) into the frame (1) and line up the holes.
Secure the seat in position with the adjusting knob (10). The
correct height for the seat can be adjusted after the bike is
fully assembled.
STEP 4
Fasten the handle bar (11) to the main frame (1) with two allen
key bolts M8x35 (12) and two curved washers (4).
ENGLISH
15