Assembly And Disassembly Of The Top Cover; Warranty And Technical Service; Manufacturer's Warranty - ECOFOREST AU12 Manuel D'installation

AU12 Installation Manual and Technical Service

7.1. Assembly and disassembly of the top cover

A 4 mm Allen wrench is needed to assemble and disassemble the covers. Remove the fastening screws and pull the cover upwards.
Figure 7.1.Disassembling the top cover in the AU12 unit.

8. Warranty and technical service

8.1. Manufacturer's warranty

ECOFOREST is liable for lack of conformity of the product or its spare parts, in compliance with the current regulations of the
country where the product is purchased. The warranty is only valid in the country where the product is purchased.
In addition, with previous consent from ECOFOREST, the local authorised distributor can offer an extension of the warranty
established by current legislation.
37