Matrix RT 280-21 Traduction De La Notice Originale page 12

trimmer away from walls, changes of surface and
fragile objects.
. Never use the grass trimmer without a guard.
CAUTION! The guard is vital for your safety
and for the safety of others, and it is also
essential for the grass trimmer to work
correctly. Failure to observe this instruction
will not only create a potential hazard, it will
also result in the loss of your rights under the
warranty.
. Never try to stop the cutter (nylon line) with
your hands. Wait until it stops by itself.
. It is imperative to use only the original nylon
line.
Never use metal wire instead of the nylon line.
. Beware of injuring yourself on the line cutting
device.
. Keep the air vents clear of dirt.
. After use, unplug the machine and check it for
damage.
. Never attempt to cut grass that is not growing
on the ground. For example, do not try to cut
grass growing on walls, rocks, etc.
. Within the working radius of the grass trimmer
the user is responsible for any damage caused
to third persons by use of the trimmer.
. Never cross roads or pebble paths with the grass
trimmer switched on.
. When you are not using the grass trimmer, keep
it in a dry place out of the reach of children.
. Use the grass trimmer only as described in these
directions for use and always hold it vertical to
the ground. All other positions are dangerous.
. Check the screws regularly to see that they are
properly tightened.
12
. The mains voltage must be the same as the
voltage specified on the rating plate.
. Check the power cable regularly for signs of
damage or aging. Never use the grass trimmer if
the power cable is in less than perfect condition.
. Power cables used with the trimmer must not be
of a lighter duty class than HO7RN-F
rubberinsulated flexible cables according to DIN
57282 / VDE 0282 with a minimum diameter of
2
1.5 mm . Plug connectors must be equipped with
earthing contacts and the coupling must be rain-
waterprotected.
. Keep cables and other objects out of the area
you want to cut.
. If you have to lift the grass trimmer to move it,
switch off the motor and wait for the rotating
tool to stop. Before you leave the trimmer, switch
off the motor and pull out the power plug.
. Before you connect the grass trimmer to the
power supply, make sure that none of its moving
parts are damaged and that the line spool is
correctly inserted and fastened.
. Never cut against hard objects when using the
grass trimmer. This is imperative to avoid
causing injury to the user and damage to the
trimmer.
. Use only original replacement parts for repair
and maintenance purposes.
. Have repairs carried out only by a qualified
electrician.
. Examine the grass trimmer for signs of wear or
damage each time before you use it and after
any collisions. Have essential repairs carried out
without delay.
. Always keep your hands and feet away from the
cutting mechanism, particularly when you switch