Technical Data - Matrix RT 280-21 Traduction De La Notice Originale

on the trimmer.
. After pulling out new line, always return the
trimmer to normal working position before you
switch it on again.
. Never use replacement parts or accessories
which are not foreseen or recommended by the
manufacturer.
. Pull out the power plug before carrying out any
inspection, cleaning or other work on the
trimmer and whenever it is not being used.
Description of the warning sign on the
equipment
Important. Please read the operating
instructions carefully before using the
equipment.
Beware of thrown or flying objects to
bystanders. Keep bystanders a safe
distance away from the machine.
Pull out the power plug before
checking a damaged power cable!
Do not use the equipment in the rain,
in damp conditions or on wet grass.
Wear safety goggles.
Wear ear protection!
Caution! The nylon line will run
on for a few seconds after the
tool is switched off!
Sound power level guaranteed:
95 dB(A)
95
dB
Layout (Figure A)
1. Power cable
2. Cable strain-relief clamp
3. ON/OFF switch
4. Upper handle
5. Motor housing
6. Guard hood
7. Line spool
8. Blade for regulating the line length

Technical data

Voltage
Power rating
Cutting width
Speed
Nylon cutting line
Sound pressure level measured:
Sound power level measured:
Sound power level guaranteed:
Vibration a :
hv
Protection class:
Weight
The machine may exceed 85 dB (A). The operator
will require noise protection measures if this is
the case. The noise generated by this machine
Keep other people out
of the danger area!
230-240 V ~ 50 Hz
300 W
ø 24 cm
11,500 rpm
ø 1.2 mm
82 dB(A),K=3
93,7 dB(A), K=1,4
95 dB(A), K=1,4
2
4,07 m/s , K=1,5
II/
1.3 kg
13