Air Flow Direction Adjustment - Atlantic Muraux DOJO Notice D'installation Et D'utilisation

Operation mode
AUTO
COOL
DRY
HEAT
FAN

4.1. Air flow direction adjustment

Status display of air flow/vertical flap
For each press of the SWING button
COOL/DRY
HEAT
Left and right air flow adjustment (this function is unavailable on some models).
For each press of swing button
Remote controller
AIR
, the remote controller displays as follows:
Initial state
AIR
, the remote controller displays as follows:
When operating in AUTO mode, the air
conditioner automatically selects Cool or Heat
operation according to room temperature.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according
to room temperature.
Cooling only units do not have displays and
functions related with heating.
In DRY mode, when room temperature becomes
lower than temp. setting +2°C, the unit runs
intermittently at LOW speed regardless of FAN
setting.
In HEAT mode, warm air blows out after a short
period of the time due to cold-draft prevention
function.
When operating in FAN mode, the unit does
not operate in COOL or HEAT mode but only in
FAN mode. AUTO is not available in FAN mode.
And temperature setting is disabled.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according
to room temperature. In FAN mode, SLEEP
operation is not available.
Note
39