User's Guide - INFOSEC UPS SYSTEM Smart Line 500 Notice D'utilisation

To ensure good installation and maximum use of this product, we highly advise you to read
this user's guide very carefully.
1 . I N T R O D U C T I O N
This UPS range is specially designed for multimedia Personal Computers. Its light weight
and compact design perfectly fit with limited working environments.
Smart Line is equipped with 2 or 3 secured outlets (depending on the model) which benefit
from backup time for critical devices and 2 RJ11 surge protected outlets.
2 . M A I N C H A R A C T E R I S T I C S
2 or 3 secured outlets (depending on the model)
2 RJ11 surge protected outlets
Tel/Fax/Modem line surge protection
Up to 30 mn backup time (depending on the model and the connected load)
Wide input voltage range
High frequency technology
Microprocessor control guarantees high reliability
Compact size, light weight
Easy to install and use
3 . S A F E T Y I N S T R U C T I O N S – S e c u r i t y
Risk of Electric Shock:
The Smart Line unit is potentially using hazardous voltages. Do not take this
equipment apart. It does not contain accessible components to be repaired by users.
All repairs should be performed by qualified technicians only.
The utility power outlet shall be near the equipment and easily accessible. To isolate
Smart Line from AC input, remove the plug from the utility power outlet.
The mains socket outlet that supplies Smart Line shall be installed near the UPS and
shall be easily accessible.
Smart Line has its own internal power supply (battery). There is a risk that output
sockets may still be live after Smart Line has been disconnected from the mains power
supply.
Install Smart Line in a temperature and humidity controlled indoor area free of
conductive contaminants.
Smart Line should not be exposed to direct sunlight or heat-emitting sources. Do not
cover the ventilation grills.
Disconnect Smart Line from AC power before cleaning it. Do not use product but only
a damp cloth.
In case of emergency, switch Smart Line into off position and disconnect the product
from the AC power.
When Smart Line is out of order, please refer to "trouble shooting" section and
contact the hot line.
2 Infosec UPS System - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 03 05 04 206 15

User's guide