Bertazzoni P78ICHNE Prescriptions De Montage Et Mode D'emploi page 37

Power limiter setting menu 7.4kW / 2.8kW / 3.5kW
• Setting is only possible for the first 2 minutes after connecting the unit
to the mains
• The command must be switched on, unlocked, and no zone selected
• Press the two front cooking zones simultaneously for 3 seconds
• Once the function is activated, the command will beep
• Now the power level can be set with the "+" and "-" commands
• The timer display shows the current setting:
• To save the setting, press the two front zones simultaneously again for 3
seconds
• If the save is successful, the command will beep
Note: if no action is performed for 60 seconds, the change will not be
accepted
1) 7.4kW
2) 2.8kW
3) 3.5kW