Points To Observe For Safe Usage - Alpine SPX-13PRO Manuel De L'utilisateur

Points to Observe for Safe Usage
• R ead this manual carefully before starting
operation and use this system safely. We cannot
be responsible for problems resulting from failure
to observe the instructions in this manual.
• T his manual uses various pictorial displays to
show how to use this product safely and to avoid
harm to yourself and others and damage to your
property. Here is what these pictorial displays
mean. Understanding them is important for
reading this manual.
• M eaning of displays
This label is intended to alert the user
to the presence of important operating
Warning
instructions. Failure to heed the
instructions will result in severe injury
or death.
This label is intended to alert the
user to the presence of important
Caution
operating instructions. Failure to heed
the instructions can result in injury or
material damage
Warning
DO NOT DISASSEMBLE OR ALTER. Doing so
may lead to accident, fire or electric shock.
KEEP SMALL ARTICLES OUT OF THE REACH
OF CHILDREN. If swallowed, consult a physician
immediately.
USE ONLY VEHICLES WITH A 12 VOLT
NEGATIVE (-) GROUND. Check with your dealer if
you are not sure. Failure to do so may result in fire
or electric shock.
BEFORE WIRING, DISCONNECT THE CABLE
FROM THE NEGATIVE (-) BATTERY TERMINAL.
Failure to do so may result in electric shock or
injury due to electrical shorts.
DO NOT INSTALL IN LOCATIONS WHICH
MIGHT HINDER VEHICLE OPERATION OR
CREATE HAZARDS FOR VEHICLE OCCUPANTS.
Doing so may obstruct forward vision or hamper
movement.

-EN
DO NOT CONTACT, DAMAGE OR OBSTRUCT
PIPES, FLUID LINES OR WIRING WHEN
DRILLING HOLES. Failure to take such precautions
may result in fire or cause an accident or injuries.
HALT USE IMMEDIATELY IF A PROBLEM
APPEARS. When problems occur such as a lack
of sound or video, foreign objects inside the unit,
smoke coming out, or noxious odors, stop use
immediately and contact the dealer where you
bought the equipment. Failure to do so may result in
an accident or injury.
MAKE THE CORRECT CONNECTIONS.
Failure to do so may cause fire or accident to occur.
ARRANGE THE WIRING SO IT IS NOT CRIMPED
OR PINCHED. Route the cables and wiring so as
not to be crimped by moving parts or make contact
with sharp or pointed spots which might damage the
wiring. Failure to do so may cause failure of unit or
vehicle.
.
DO NOT USE THIS EQUIPMENT FOR
PURPOSES OTHER THAN STATED FOR THE
VEHICLE. Failure to do so may result in electric
shock or injury.
HAVE THE WIRING AND INSTALLATION DONE
BY EXPERTS. The wiring and installation of this
unit requires special technical skill and experience.
To ensure safety, always contact the dealer where
you purchased this unit to have the work done.
USE SPECIFIED ACCESSORY PARTS AND
INSTALL THEM SECURELY. Use of other than
designated parts may damage this unit internally or
may not securely install the unit in place as parts
that come loose may create hazards.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST. A high incidence of
moisture or dust that penetrates into this unit may
cause smoke or fire.
Caution