Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SD 4500 / SD 2500 drywall screwdrivers
It is essential that the operating instructions
are read before the tool is operated
for the first time.
Always keep these operating instructions
with the tool.
Ensure that the operating instructions are
with the tool when it is given to other
persons.
Operating controls and parts
" chuck (for bit holder, magazine bit)
1
/
4
Adjustable depth gauge (with bit change function)
Tool / accessory interface (click connection)
Coupling system / gearing
Motor
Belt hook
Motor cooling air intake
Lockbutton for sustained operation
Supply cord
On / off switch (with electronic speed control)
Forward / reverse switch
Type plate
Cooling air exit with controlled air flow
Contents
Printed: 07.07.2013 | Doc-Nr: PUB / 5070548 / 000 / 00
1. General information
1.1 Safety notices and their meaning
-CAUTION-
Draws attention to a potentially dangerous situation that
could lead to minor personal injury or damage to the
equipment or other property.
-NOTE-
Draws attention to instructions and other useful infor-
mation.
1.2 Pictograms
Warning signs
General
warning
Obligation signs
Wear eye
protection
Symbols
Read the operating
instructions
before use.
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the SD 4500 and / or
Page
SD 2500 screwdriver is referred to as « the power tool ».
1
Location of identification data on the power tool
2
The type designation can be found on the rating plate
3
and the serial number on the side of the motor housing.
3
Make a note of this data in your operating instructions
4
and always refer to it when making an enquiry to your
5
Hilti representative or service department.
6
7
Type:
7
7
Serial No.:
Warning:
electricity
Return waste
material for
recycling
en
1
Publicité
Chapitres
Table des Matières
