Accessories; Service Information - Black+Decker BSV2020 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Removing and cleaning the rotary brushes (Fig. P)

CAUTION:
moving parts, disconnect lift away canister before
cleaning or servicing.
To remove the rotary brush
Depress the release button 
The rotary brush 
31
Clean rotary brush, and reinstall. Ensure it is secured in
its locked position before operating.
Fig. P
32
Replacing the filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged. Replacement filters are
available from your BLACK+DECKER dealer.
Visit www.blackanddecker.com to locate dealers.
Remove the old filters as described in Cleaning the Filters.
Fit the new filters as described in Cleaning the Filters.
(cat. no: BSVF1, BSVFA for allergy vacs)
Maintenance
Use only mild soap and damp cloth to clean the vac. Never
let any liquid get inside the vac; never immerse any part of
the vac into a liquid.

WARNING:
completely dry before using it.
iMPORTAnT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service organizations,
always using identical replacement parts.
10
To reduce the risk of injury from
31
from the floor brush 
32
as shown in Figure P.
can now be removed.
31
Make sure the vacuum is
Troubleshooting
if the product does not work, check the following:
The charger was correctly plugged in for recharge. (It
feels slightly warm to the touch.)
The charger cord is not damaged and is correctly attached.
The charger is plugged into a working electrical outlet.
 11
if vacuum performance is poor, check the following:
Clean the filters. (See Cleaning and Emptying the
vacuum section.)
Empty the dust canister. (See Cleaning and Emptying
the vacuum section.)
Clean the rotary brushes. (See Removing and Cleaning
the rotary brushes section.)
The LED flashes continuously, plug in the charger and
perform a recharge cycle
For assistance with your product, visit our website
www.blackanddecker.com for the location of the service
center nearest you or call the BLACK+DECKER help line at
1–800–544–6986.

Accessories

11
Recommended accessories for use with your appliance are
available from your local dealer or authorized service center.
If you need assistance regarding accessories, please call:
1-800-544-6986.

WARNING:
not recommended for use with this appliance could
be hazardous.
Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a BLACK+DECKER
factory service center or a BLACK+DECKER authorized
service center. Always use identical replacement parts.

Service Information

All BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
BLACK+DECKER location nearest you. To find your local
service location, call: 1-800-544-6986 or visit
www.blackanddecker.com
The use of any accessory

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bsv2020aBsv2020p

Table des Matières