Presetting Channels Automatically - Sony Trinitron KV-2199M5J Mode D'emploi

Presetting channels
You can preset up to 100 TV channels in numerical
sequence from program position 1 using the buttons on
the remote commander or the TV.
You can preset TV channels quickly, automatically or
manually.
Remote commander
Front of TV
SELECT
Quick channel presetting
U
1
Press to turn on the TV.
When the TV is turned on in standby mode, press
u
on the remote commander.
2
Press SELECT and PROGR + on the TV
simultaneously for one to two seconds.
SELECT PROGR
6 -EN
Getting Started
Number
PROGR +/–
SELECT
+/–
PROGR
1 2 3
If the picture color is poor and/or the sound is
noisy (for KV-J21MF2J/J14M1J)
Select the appropriate TV system as follows:
1 Press SELECT on the remote commander or the TV
until "TV SYSTEM" appears.
2 Press +/– on the remote commander or
the TV until the picture and sound become normal.
Notes
• If you do not know your local TV system, consult your nearest
authorized service center or dealer.
• The setting of the "TV SYSTEM" is memorized for each
program position.

Presetting channels automatically

1
Press SELECT on the remote commander or
the TV until "TV SYSTEM" appears on the
screen (for KV-J21MF2J/J14M1J).
SELECT
or
2
Press +/– on the remote commander or
.
+/– on the TV to select the TV system
(for KV-J21MF2J/J14M1J).
or
3
Press SELECT on the remote commander or
the TV until "AUTO PROGRAM" appears on
the screen.
SELECT
or
4
Press +/– on the remote commander or
.
+/– on the TV.
or
1
.
SELECT
TV SYSTEM
B/G I D/K
SELECT
AUTO PROGRAM
VHF LOW
+/– on
M
1
B/G