Power Supply - AUDIOropa xepton-NX TR Mode D'emploi

3.8 Input level switch
This switch controls the input level of the 2 audio input connectors on the
rear panel. Depending on the strength of the input signal, the signal can be
amplified or attenuated by 10dB if necessary. When the switch is in the center
position »N« (neutral), no change in level is applied.

3.9 Power supply

The transmitter is powered over the USB connection. The device can be powered by
a regular USB powerpack for mobile phones and can hereby be used in a portable
manner. Connect the powerpack to the USB connector on the rear of the device. The
power consumption of the device is approx. 200mA.
4.1 Assignment of the connection sockets
XLR 4-pin XLR balanced 6.3 mm jack
4.2 Encryption
If the use of Xepton-NX requires discretion, such as in court buildings or during private
sessions, the communication between transmitter and receiver can be encrypted.
Other Xepton-NX devices can then no longer participate in the communication.
For this purpose, basic settings on the involved devices must be changed - please
contact your authorized AUDIOropa dealer.
English 15