Power Supply; Applications - AUDIOropa xepton T-1 Mode D'emploi

3.8 Power supply

The transmitter is powered over the USB connection. The device can be pow-
ered by a regular USB powerpack for mobile phones and can hereby be used
in a portable manner. Connect the powerpack to the USB connector on the rear
of the device.The power consumption of the device is approx. 200mA.

4. Applications

4.1 Transmitting with T-1 and receiving with RX-1
An unlimited amount of RX-1 receivers can be used to receive the transmission
of the T-1. All devices must be set to the same channel group number.
English 17
BA Xepton T-1.indd 17 11.11.2016 08:49:22