Operating Instructions; Usage Diagrams - Hydas 4507.1.00 Mode D'emploi

8 | Operating instructions

a
Be sure you know the right points where to place the electrodes and affix
them there then, connect the electrodes to Digital Pain Relief with wire.
b
Switch power on.
c
After setting mode, intensity and time, you could feel stimulation at
electrodes and treatment starts. The time display is enabled and displays
the remaining time of application.
d
Switch power off.
e
Take electrodes off and clear them as shown in «User Manual»
Clean the electrodes.
• You should hold the plug when pulling it out. Please do not pull the wire.
• Please use clear water to wash or use wet cloth (instead of facial tissue) to
gently wipe up the electrodes when cleaning them.
• Do not use brush or fingernail to clean surface of the electrodes to avoid
scratching them.

8.1 | Usage diagrams

Waist
Back
Leg
Chest and
abdomen
Arm
Joints
Adductors
Buttocks
27