Technical Data; Declaration Of Conformity - Bresser Researcher Bino Mode D'emploi

5. Cleaning the oil immersion lens:
After working with oil immersion, the immersion oil should
be removed from the lens of the 100x objective at the end of
each workday. In order to do this, use a lens tissue moiste-
ned with a small amount of pure alcohol (available in the
chemist's shop). Don't forget to clean the preparation, too.
6. When not in use:
After usage, cover the microscope with the dust cap (made
of plastic) and place it where it is dry and mouldless. In
the case of non-use for a longer time, you should stow the
microscope and the accessories in their correct containers
again. We suggest the storage of all objectives and eyepi-
eces in a closed container with drying agent.
Remember: A well maintained microscope will keep its
optical quality for years and thus maintain its value.

9. Technical data:

5722100: Binocular head
5723100: Trinocular head
Mechanical desk (with vernier alignment)
Eyepieces: DIN WF 10x
Objectives: DIN 4x / 10x / 40x / 100x
Magnification: 40x -1000x
Illumination: LED
Accessories: Immersion oil, fuse
10. Aperture:
The numerical aperture (the unit of measurement for the reso-
lution factor of the objectives) is engraved beside the magnifi-
cation sign on the objectives.
11. The magnification for microscopes
It is calculated by the formula:
Eyepiece magnification x objective magnification
= total magnification
Example:
10x-eyepiece x 100x-lens = 1000x total magnification
Disposal
Dispose of the packaging materials properly, accord-
ing to their type (paper, cardboard, etc). Contact your
local waste disposal service or environmental authority for
information on the proper disposal.
Do not dispose of electronic devices in the household gar-
bage! As per the Directive 2002/96/EC of the European Par-
liament on waste electrical and electronic equipment and its
adaptation into German law, used electronic devices must be
collected separately and recycled in an environmentally friend-
ly manner. Empty old batteries must be disposed of at battery
collection points by the consumer. You can find out more in-
formation about the disposal of devices or batteries produced
after 01.06.2006 from your local waste disposal service or en-
vironmental authority.
Please take the current legal regulations into account when
disposing of your device. You can get more information on the
proper disposal from your local waste disposal service or en-
vironmental authority.

Declaration of Conformity

Bresser GmbH has issued a "Declaration of Conformity" in ac-
cordance with applicable guidelines and corresponding stand-
ards. The full text of the EU declaration of conformity is avail-
able at the following internet address:
www.bresser.de/download/5722100/CE/5722100_CE.pdf
www.bresser.de/download/5722100/CE/5723100_CE.pdf
- 9 -
DE
AT
CH
GB
IE
FR
CH
BE
ES
RU