B-2. Serial Interface Type - Star TSP800 Série Mode D'emploi

B-2. Serial Interface Type

ON
OFF
No. 1 2 3 4 5 6 7 8
DIP-SW1
Switch 1-1
ON
OFF
ON
The factory settings of DIP switch are all on.
The functions of switches 1-3 through 1-8 will change according to the command
emulation that has been set using switches 1-1 and 1-2.
(1) Star Line mode
Switch
1-1 Command emulation
1-2 Command emulation
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking conditions
(conditions for BUSY)
1-7 Automatic status back function
1-8 Should not be changed (Should be set to on)
(2) Star Page mode
Switch
1-1 Command emulation
1-2 Command emulation
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking conditions
(conditions for BUSY)
1-7 Automatic status back function
1-8 Should not be changed (Should be set to on)
DIP-SW 1
Switch 1-2
OFF
Function
Function
– 104 –
ON
OFF
No. 1 2 3 4
DIP-SW2
ON Star Line Mode
ON Star Page Mode
DP8340 Mode
ON
Always ON
Always ON
Invalid
Offline or receive
buffer full
Invalid
ON
Always OFF
Always ON
Invalid
Offline or receive
buffer full
Invalid
Command emulation
OFF
Valid
Receive buffer full
Valid
OFF
Valid
Receive buffer full
Valid