Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
IB514009EN
Installation Instructions - Crosstour Escutcheon Plates
Instructions D'installation - Crosstour Écussons
Instrucciones De Instalación - Crosstour Placas Escudo
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance.
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance. Risk of fire/electric
shock. If not qualified, consult an electrician.
WARNING
Risk of Electric Shock—Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Burn—Disconnect power and allow fixture to
cool before servicing.
IMPORTANT: Read before installing fixture. Retain for future reference.
SAFETY: This fixture must be wired in accordance with the National Electrical Code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under
installation section.
WARNING
Risk of Personal Injury—Fixture may become damaged
and/or unstable if not installed properly.
WARNING
DO NOT mount luminaire within 6" of a combustible
surface. DO NOT handle luminaire by the glass.
N
ote:
These instructions do not claim to cover all
details or variations in the equipment, procedure,
or process described, nor to provide directions
for meeting every possible contingency during
installation, operation or maintenance. When
additional information is desired to satisfy a
problem not covered sufficiently for user's purpose,
please contact your nearest representative.
Specifications and dimensions subject to change
N
ote:
without notice.
Brand Logo
reversed out of
black
INS #
INS #
Publicité
Manuels Connexes pour Eaton LUMARK XTOR1A-PC1
Sommaire des Matières pour Eaton LUMARK XTOR1A-PC1
- Page 1 Brand Logo reversed out of black IB514009EN INS # INS # Installation Instructions - Crosstour Escutcheon Plates Instructions D’installation - Crosstour Écussons Instrucciones De Instalación - Crosstour Placas Escudo WARNING WARNING Make certain power is OFF before starting installation Risk of Personal Injury—Fixture may become damaged or attempting any maintenance.
- Page 2 Use anchor bolts (supplied by others) to attach escutcheon plates to wall. ote: XTOR front cover may need to be removed to provide access to bottom two screw holes. Figure 3. Figure 1. 17-1/2” [445mm] 10” [254mm] Figure 4. Figure 2. EATON IB514009EN Installation instructions...
- Page 3 Install XTOR MAXX luminaire to wall per luminaire instructions. Install escutcheon plates around XTOR MAXX luminaire per (Figure 5 and Figure 6). 19-1/4” [489mm] Use anchor bolts (supplied by others) to attach escutcheon plates to wall. 19-1/4” [489mm] Figure 6. Figure 5. EATON IB514009EN Installation instructions...
-
Page 4: Important
10” instructions du luminaire. [254mm] Installez les écussons autour du luminaire XTOR. Les écussons XTOR peuvent être installés à la verticale (Figure. 3 et 4) ou à l’horizontale (Figure. 1 et 2). Figure 2. Figure 1. EATON IB514009EN Installation instructions... - Page 5 Figures. 5 et 6. Utilisez les boulons d’ancrage (fourni par d’autres) pour fixer les écussons au mur. Figure 5. Figure 3. 19-1/4” [489mm] 19-1/4” [489mm] Figure 6. Figure 4. EATON IB514009EN Installation instructions...
- Page 6 [254mm] Instale las placas del escudo alrededor de la luminaria XTOR. Las placas del escudo de XTOR pueden instalarse en forma vertical (Figura. 3 y 4) u horizontal (Figura 1. y 2). Figura 2. Figura 1. EATON IB514009EN Installation instructions...
- Page 7 XTOR MAXX según las Figura. 5 y 6. Utilice pernos de anclaje (suministrados por terceros) para conectar las placas del escudo a la pared. Figura 5. Figura 3. 19-1/4” [489mm] 19-1/4” [489mm] Figura 6. Figura 4. EATON IB514009EN Installation instructions...
- Page 8 Warranties and Limitation of Liability Please refer to www.eaton.com/LightingWarrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.eaton.com/LightingWarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/LightingWarrantyTerms para conocer nuestros términos y condiciones.