Replacement Of The Fuse; General Advice; Guarantee - Dreve Dentamid Dosper evo D-5050 Mode D'emploi

Appareil de mélange et de dosage pour silicones
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Dosper evo

11. Replacement of the Fuse

Disconnect the power cord from the
current supply.
The fuse holder is integrated in the
mains connection on the back of the
machine.
For the control or the change of the fuse
press the upper and the lower latch of
the fuse holder simultaneously and take
the holder out.
34
Pull the defective fuse out of the clamp
holder by pulling gently. Replace with
a new, identical fuse.
Important notice: Only use fuses with
protection power (T 1, 6A) as stated on
the back of the machine.
After the change insert the fuse holder
again by pressing gently until the fixa-
tion locks noticeably.

12. General Advice

Repairs and maintenance shall only be
- the machine is used in compliance with
executed by authorized and qualified per-
sonnel. In any case the electricity supply
- enhancements, re-adjustments, changes
of the machine must be disconnected.
The company DREVE is only responsible
for the safety, reliability and performance
of the device, if
As we are constantly working on the
- the machine is only used according to
advancement of our products, we reserve
its purpose
the right for technical modifications.
- the machine is only operated by trained
personnel

13. Guarantee

Liability
The right of the purchaser to bring
actions arising out of defects shall in
The right of the purchaser to bring
all cases be in lapse 2 years after the
actions arising out of defects shall in
date of delivery. The guarantee obliga-
all cases be in lapse one year after the
tion is only valid for material or produc-
date of delivery. The warranty obli-
tion defects. It does not refer to natural
gation does not refer to natural wear
wear and tear nor to damage occurring
and tear or to damage occurring after
after the transfer of risk due to improper
the transfer of risk due to improper or
or unsuitable handling, excessive stres-
unsuitable handling, excessive stres-
sing, unsuitable operating material, and
sing, unsuitable operating material,
chemical, electrochemical or electrical
and chemical, electrochemical or elec-
influences of a nature not provided for
trical influences of a nature not provi-
according to the contract. On improper
ded for according to the contract. On
alterations or repairs or maintenance
improper alterations, repairs or main-
carried out by the purchaser or third
tenance or breach of seals, carried
parties, the guarantee obligations of
out by the purchaser or third parties,
the supplier and his liability for conse-
our warranty obligations and liability
quences caused thereby are rendered
for consequences causes thereby are
void.
rendered void.
this instructions manual
or repairs are executed by persons
authorized by the manufacturer Dreve
35
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dosper evo d-505-a

Table des Matières