Technical Description; Technical Data; Declaration Of Conformity - Dreve Dentamid Dosper evo D-5050 Mode D'emploi

Dosper evo

1. Technical Description

The Dosper evo is a mixing and dosing
unit for all thin-flowing 1:1 duplicating
silicones (addition-vulcanising or VPS)
that are daily used in dental or ortho-
dontic laboratories.
The machine delivers, doses, and mixes
the silicones fully automatic and makes

2. Technical Data

H x W x D (height x width x depth):
Weight:
Mains voltage:
Power consumption:
Fuse:
Output:
Gear motor with overheat protection
Manual adjustability of delivered quantities
Illuminated work area
Optional:
22
the exactly required material quantity
available at the push of a button.
Quick couplings allow the connection of
all original packaging units (1kg, 6kg,
25 kg) as well as the optionally availa-
ble clear-transparent material reservoirs
319 mm x 225 mm x 405 mm
approx. 10 kg (without material)
220 – 230 V / 50-60 Hz 115 V / 60 Hz
(Voltage / Frequency see type plate)
approx. 280 W
1,6 A
150 ml / min.
Auto-stop before complete emptying
(only when used with material reservoirs)
3. EC- Declaration of Conformity
according to Low-Voltage Directive (2006/95/EG)
Herewith we declare that the machine described below in its conception and design
and in the shape delivered by us is in accordance with the fundamental requirements
for safety and health as prescribed in the applicable EC directives.
In the case of any change or modification of the machine, not authorized by us, this
declaration becomes invalid.
Denomination of the
machine: Dosper evo
D-5050 / D-5050-A
Type of machine: Dosing and mixing unit for silicone masses
Applicable harmonised standards:
2006/95/EG Low voltage guideline
2004/108/EG EMV-guideline
Applicable harmonised standards
2006/95/EG Low Voltage Directive
EN 61010-1:2001 Safety requirements for electrical equipment for
measurement, control and laboratory use - part 1:
General requirements [IEC 61010-1:2001]
2004/108/EG EMV-guideline
EN 61326-1:2006 Electrical process measuring and control devices,
laboratory units – EMV-requirements – part 1:
General requirements (IEC 61326-1:2005)
German Version 61326-1:2006
Emission according to business sector and
small enterprises
EN 55014-1S Measuring of the interference voltage according to
EN55014-1:2006 frequency range 150kHz – 30MHz
Conducted emissions special evaluation of the inter-
ference
Dreve Dentamid GmbH
Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-40 · Fax: +49 2303 8807-55
E-Mail: info@dreve.de · www.dreve.com
23