Scheme Of Functional Components; Handling; Connection Of The Silicone Containers; Connection Of 2 X 1 Kg (850 Ml) Bottles - Dreve Dentamid Dosper evo D-5050 Mode D'emploi

Dosper evo

6. Scheme of Functional Components

8
9
4b
5b
2
No. Description
3
1 Main switch
2 Fuse holder
3 Mains connection
4a Connector socket for autostop
(only if material reservoirs
are used)
4b Connector socket for autostop
(only if material reservoirs
are used)
5a Adapter for material container
5b Adapter for material container
6 Mixing head
26
7
6
10
4a
5a
1
7 Activation button
8 LED lighting
9 Setting screw
10 Setting screw
7. Handling of the Dosper evo
Use high quality duplication silicones
deviation of the ideal 1:1 mixture (see
only. Unequal viscosities and distribu-
point. 8.2)
tion of filler materials in the individual
components can lead to an abrasion
We recommend the use of Dreve
in the pump housing and thus to a
Dublisil-Silicones.

7.1 Connection of the Silicone Containers

With the help of adapters all commonly within the machine, causing major
used material containers as well as the repairs which will have to be executed
optionally available material reservoirs in our plant in Unna.
can be connected to the Dosper evo.
Important notice:
Important notice: The filling level of the containers must
Please make sure that the component be controlled constantly!
connections are never mixed up. They shall never be emptied completely.
On replacement of bottles or the refill Otherwise air might get into the system
of the reservoirs always ensure that the and the machine must be de-aerated in
catalyst (standard colour white) as well a complex procedure (see. point 8.1).
as the base (coloured) are always con- A minimum level of about. 2-3 cm
nected to the same side of the machine. always has to remain in the containers.
Already through minimal blending of
the components the silicone hardens

7.1.1 Connection of 2 x 1 kg (850 ml) Bottles

Replace the original cap of the bottle attach them to the respective coun-
by the adapter, which is included in the terparts of the adapters (5) on the
delivery, and fasten it hand-tight. machine. Press down until they noti-
Note that each adapter must absolutely ceably snap into place.
be used for the same silicone compo-
nent again when changing bottles in To allow a problem-free flow of the
the future. silicone mass in the Dosper evo, and
The bottles can now be connected to in order to avoid the development of a
the machine with the help of the adap- vacuum in the bottles, pierce tiny holes
ters. Turn the bottles upside down and into their bottoms.
27