Important Safety Notes - Sprint Electric PL Guide De Démarrage Rapide

1 Introduction
This Quick Start Guide is intended as a supplement to the PL/X Product Manual, to allow you to
quickly get your PL/X Drive up and running as a basic speed controller in a safe and efficient manner.
For any other application, please refer to the PL/X Product Manual.
2

Important safety notes

Drives and process control systems are a very important part of creating better quality and value
in products, but they must be designed, installed and used with great care to ensure everyone's
safety. Pay particular attention to all the safety warnings in this section.
Electric shock risk! Electrical devices constitute a safety hazard. It is the responsibility of
the user to ensure compliance with any acts or bylaws in force.
Do not attempt to commission the PL/X unless you:
• are qualified, and have the knowledge and skills to use it safely.
• thoroughly understand the operation of the machine on which the PL/X is installed,
• have read and understood this document, and
• are familiar with electrical wiring and safety standards.
Only use qualified personnel to design, construct, operate and maintain your systems.
Make sure that all personnel who use or maintain the equipment are aware of all the
hazards that are involved in your equipment and processes.
If you have any doubts about the safety of your system or process, do not proceed
without first consulting an expert.
3 Navigating the menus
Left button - L
Down button - D
Use the buttons on the front of the PL/X to navigate through the setup menus. In this Quick Start
Guide, the button sequences are listed next to the display that will be shown when the buttons are
pressed correctly.
02
Figure 3-1: Navigation button
PL/X Quick Start Guide
Up button - U
Right button - R