Cleaning And Maintenance - Roller Grill GES 23 Notice D'installation Et D'utilisation

Digital timer setting
Installation:
1) Install battery with correct polarity positioning
2) Peel off display protective sheet
3) The unit will display « 00 00 » and is ready for use
Use:
1) Press [MIN] / [SEC] to set the desired count down time
2) Press [START/STOP] to start timer. The buzzer will sound when displays
counts down to "00 00".
3) Press [START/STOP] to stop timer and the preset value will be displayed
4) Press [MIN] / [SEC] simultaneously to clear display value to "00 00"
5) Press [START/STOP] to start the count up time
Stopping the appliance
Set thermostat control knob (n°3 on picture) on 0
Disconnect the power cable.
Let the device cool
Clean the appliance. (see 6. Cleaning)
Grease the plates
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and con-
fide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.

6. CLEANING AND MAINTENANCE

Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- For cleaning of plates, only use non-abrasive products, clean regularly the external
walls of your device with warm water and wash liquid: avoid the abrasive towelling.
Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device shield-
ed from the humidity and grease the plates.
18