Cleaning And Maintenance - Roller Grill GES 80 Notice D'installation Et D'utilisation

Putting on
Turn on and preheat the plates, turn on the thermostat/commutator (n°3 on picture)
on the desired position, the green pilot light (n°1 on picture) and the orange pilot light
(n°2 on picture) ignite. The machine is warming up.
When the orange pilot light turn off, the machine is ready to be used
Grease the plates before each cooking.
Temperature setting
Set the temperature by positioning the thermostat/commutator (n°3 on picture) to the
desired temperature. The orange pilot light (n°2 on picture) switches on if a higher
level of temperature is required and switches off when the same is reached.
If the temperature is too high, just open the plates to make it cool quickly.
Stopping the appliance
Set the thermostat/commutator (n°3 on picture) on 0
Let the device cool.
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
Grease the plates
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the
complete reference of your device (commercial name, type and serial number). This
information appears on the visible descriptive plate behind the device.

6. CLEANING AND MAINTENANCE

Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- For cleaning of plates, only use non-abrasive products,, soapy water or wash liquid
- Clean regularly the external walls of your device with warm water and wash liquid:
avoid the abrasive towelling. Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
19