Overview Of Basic Settings Menu - Hydac HDA 5500 Notice D'utilisation

HDA 5500

7.2 Overview of basic settings menu

Menu point Setting
Primary display (PriM)
Value which is normally displayed:
Display filter (diSP)
Reset time (r.TiM)
Indicates how long in seconds the last peak / lowest value is
displayed for.
Measured value sensor 1
Lowest value sensor 1
Peak value sensor 1
Measured value sensor 2
Lowest value sensor 2
Peak value sensor 2
Measured value sensor 3
Lowest value sensor 3
Peak value sensor 3
Differential value (sensor 1 - sensor 2)
Lowest differential value (sensor 1 - sensor 2)
Peak differential value (sensor 1 - sensor 2)
Display reacts slowly to measurement variations
(display delay approximately 1.3 s).
Display reacts at standard rate to measurement
variations (display delay approximately 0.6 s).
Display reacts quickly to measurement variations
(display delay approximately 0.3 s).
User Manual
Setting range Default setting
SEn.1 SEn.1
Min.1
ToP.1
SEn.2
Min.2
ToP.2
SEn.3
Min.3
ToP.3
DiFF
Min.d
ToP.d
SloW MEdi
MEdi
FAST
0..3600 0
- 8 -