3 CHANGING THE COM PORT SETTING
If the CM11-USB has been installed on a different COM port
than COM1, 2, 3 of 4, you need to change the setting:
a.
Right click "My Computer" on your desktop and select
Properties.
b.
Select the Hardware tab.
c.
Select Device Manager.
d.
Open the folder "Ports COM & LPT". "Prolific USB-to-
Serial COMM port" will be shown in the list of devices
(Figure 3).
e.
Select Profilic USB-to-Serial COMM port en then
Properties.
f.
Select the Port Settings tab (Figure 4).
g.
Click Advanced.
h.
In the windows Advanced, use the
option box COM port number to
choose a different COM port (Figure 5).
Select a COM port that is not used in
the list "Ports COM & LPT" (Figure 3).
In some versions of Windows (98, ME) it is
not possible to change the COM port num-
ber in the Advanced window. If this is the
case, remove the other applications that use the COM3 or COM4 port from your system and
then install CM11-USB. CM11-USB will automatically choose COM3 or COM4. You can rein-
stall your own applications after installing CM11-USB.
More questions? For an up-to-date list of frequently asked questions about
this product, visit www.marmitek.com > customer service.
Compatibility
Windows 98SE, ME, 2000 and Windows XP
USB version 1.1 and higher
ActiveHome version 1.42 and higher
Connects directly to all CM11 computer interfaces
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product
and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indi-
cates that this product should be disposed of separately from regular household waste streams. It is your
responsibility to dispose of this and other electric and electronic equipment via designated collection facil-
ities appointed by the government or local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and human health. For more detailed information
about the disposal of your old equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
4
Figure 4
Figure 5
MARMITEK