Triton 1010W Compact Instructions D'utilisation Et Consignes De Sécurité page 4

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries
Caution!
Be aware of kickback
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
GB
4
Original Instructions
Technical Abbreviations Key
V
~
A
n
0
Hz
W, kW
/min or min
Specification
Model no:
Voltage:
Power:
No-load speed:
Depth adjustment:
Collet:
Bit changes:
Guide:
Protection class:
Ingress protection:
Net weight:
Sound and vibration information:
Sound pressure L
Sound power L
Uncertainty K:
Weighted vibration a
Uncertainty k:
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
As part of our ongoing product development, specifications of Triton products may
alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
Volts
Alternating current
Ampere
No load speed
Hertz
Watt, kilowatt
(revolutions or reciprocation) per minute
-1
JOF001
220V - 240V~ 50/60Hz
1010W
8,000 to 21,000 min
1) Micro Winder
2) Free Plunge
1/2" 6 & 12 mm
Through-base, single spanner action.
Auto shaft lock
Extended baseplate with adjustable fence
IP20
3.9kg
: 85.5dB(A)
PA
:
96.5dB(A)
WA
3dB
:
5.958m/s
h
1.5m/s
2
variable
-1
2