Dc Voltage Measurement - SKYTRONIC 600.032 Mode D'emploi

RESISTANCE
RANGE
200Ω
2000Ω
20KΩ
200KΩ
2000KΩ
Maximum open circuit voltage: 3.2V.
Overload Protection: 15 seconds, maximum 220Vrms.
AUDIBLE CONTINUITY
RANGE
TEMPERATURE (K TYPE PROBE)
RANGE
0~1000ºC
OPERATING INSTRUCTION

DC VOLTAGE MEASUREMENT

1. Connect the red test lead to the "VΩmA" jack and the black
test lead to the "COM" jack.
2. Set the Function / Range switch to the desired DCV
position. If the voltage to be measured is not known
beforehand, set the range switch to the highest range and
then turn it down until satisfactory reading is obtained.
3. Connect the test leads to the device or circuit to be
measured.
4. Turn on the power of the device to be measured. The
voltage value will appear on the LCD along with the voltage
polarity.
RESOLUTION
100mΩ
1Ω
10Ω
100Ω
1KΩ
The built-in buzzer will sound if resistance of
the circuit under test is less then 50Ω.
RESOLUTION
1ºC
ACCURACY
± 1.0% of rdg ± 2D
± 0.8% of rdg ± 2D
± 1.0% of rdg ± 2D
DESCRIPTION
ACCURACY
± 2.0% of rdg ± 3D