SKYTRONIC 600.032 Mode D'emploi page 13

•
Remove the test leads from the meter before you open the
battery door.
•
Do not operate the meter with the battery door or portions of
the cover removed or loosened.
•
To avoid false readings, which could lead to possible electric
shock or personal injury, replace the batteries as soon as the
low battery indicator ("
CAUTION
To avoid possible damage to the meter or to the equipment under
test, follow these guidelines:
•
Disconnect circuit power and discharge all high-voltage
capacitors before testing resistance, continuity, diodes, or
capacitance.
•
Use the proper terminals, function, and range for your
measurements.
•
Before measuring current, check the meter's fuses and turn
power OFF to the circuit before connecting the meter to the
circuit.
•
Before Function/Range switch to change functions,
disconnect test leads from the circuit under test.
•
Before attempting to insert transistors for testing, always be
sure that the test leads have been disconnected from any
measurement circuits.
•
Remove test leads from the Meter before opening the Meter
case.
MAINTENANCE
•
Before opening the case, always disconnect the test leads
from all live circuits.
•
For continue protection against fire, replace fuse only with the
specified voltage and current ratings: F 250mA / 250V (Fast
Blown) ø5 x 20
•
Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.
") appears.