Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Walu Pool
Woodstar
For easy installation of your WALU POOL WOODSTAR, simply follow
these steps:
1.
Place the cover at the end of the swimming pool on the side you have chosen
to store it.
2.
One person should hold the edge of the cover. A second person, from the
other side, should pull the central strap to unroll it.
3.
Centre the unit by measuring the overlap on both sides of the pool.
WARNING: a minimum overlap on the coping of 20 cm is required round
the whole perimeter.
4.
IMPORTANT: to fasten the cover, start on the storage side. Slide the 2 end
straps onto the aluminium profile positioning them 10 cm from the ends.
Position the other straps equally spaced along the profile.
Block the sideways movement of the straps by tightening the locking
screws in the groove in the profile using the Allen key provided.
5.
Fix the hooks (No. 3, p.2) using the stainless steel screws provided (No. 4,
p.2) in line with the straps, keeping a minimum distance of 35 cm between
the hooks and the edges of the pool.
Installation instructions
3 / 6
Publicité
Table des Matières
