Publicité
N
Replacing the lock
Please note: The storage box must be unlocked when replacing the lock.
1. Open the sliding door from the right (lock side, right).
2. Remove the lock's clip using a screwdriver.
3. Pull the lock and its connection to the locking bolt out through the opening of the storage box.
4. Close the sliding door and open the left-hand side.
5. Push out the Vitra plug by hand.
6. Push the lock and its connection to the locking bolt into the opening of the storage box.
6.1 Make sure that the nose of the connection to the locking bolt is facing the rear and the lock is turned to the front.
Then insert the nose into the elongated hole of the locking bolt.
7. Reinsert the clip. Push in the Vitra plug by hand.
1.
2.
3.
4.
5.
6.
6.1
7.
23
71025988GAxxS210x148K120-ADH_kplAufbau.indd 23
13.12.2011 11:23:53
Publicité
