Replacement Of Carbon Filter (Only For Circulating Air Mode) - Backer 657391 Manuel D'instructions

Care and maintenance
4. Wash the grease filter in the dishwasher or sink like ordinary dishes.
5. When grease filter is completely dry, insert it in gap. Let grease filter click
into place.
6. Reestablish the power supply.
The carbon filter is to remove odours. It must be replaced when the odours

Replacement of carbon filter (only for circulating air mode)

generated by cooking can no longer be sufficiently filtered. If used regularly, the
filter should be replaced approximately every three months.
1. Disconnect the mains plug or isolate at the appropriate main fuse.
2. Open the glass panel of the extracting hood.
3. Unlock grease filter and carefully remove grease filter.
4. Loosen and remove the charcoal filter. It can be disposed of in the household
waste.
5. Insert the new carbon filters as shown and allow the locks to click into place.
6. Insert grease filter in the gap and let it click into place.
7. Reestablish the power supply.
16
General