Parts List - Backer 657391 Manuel D'instructions

Parts list

In order to make the installation of your extraction hood as simple as possible,
all individual parts are consecutively numbered: The number in bold
print is the part number that will assist you in identifying the individual
components.
Before starting installation, please check to make sure that all individual
components are present and undamaged.
1 Extraction hood
2 upper and lower chimney facing
3 Damper bracket
4 Hose connection
5 Angle bracket
6 Bolt accessories (for mounting of hose connection and chimney facings)
This material is not included in the scope of delivery. It is available at the
Material for wall installation
specialist retailer (e.g. a hardware store).
7 4 wall plugs
8 4 screws 40 mm
Only use installation material that is suitable for the structure of
Caution!
your walls. If you are unsure about the selection, seek advice from a
specialist.
Information
1
2
3
4
5
6
7
English