LaserLiner DistanceMaster Compact Pro Mode D'emploi page 14

Angle function 2:
Angle function 2 1. measurement 2. measurement
The measurement result is determined by the 360° inclination sensor.
!
The back of the device can be used as a reference surface for
measuring angles.
Angle function 3:
Angle function 3 1. measurement 2. measurement
The measurement result is determined by the 360° inclination sensor.
!
The back of the device can be used as a reference surface for
measuring angles.
min/max continuous measurement:
The LC display shows the max value, the min value and the current value.
14
GB
1x 2x
1x 2x
Press for 3 seconds
then release button
3 sec
1x
3x 4x
3x 4x
result
height
result
height
stop
2x