Philips 9000 Série Mode D'emploi page 14

14
English
Charging
If the shaver overheats during charging, the
notification symbol flashes. When this happens,
the shaver stops charging automatically. Charging
continues once the temperature of the shaver has
decreased to the normal level after approx. 10
minutes.
Blocked shaving heads
If the shaving heads are blocked, the notification
symbol continuously lights up red. The
replacement reminder and the cleaning reminder
alternately flash white and the shaver beeps. In
this case, the motor cannot run because the
shaving heads are dirty or damaged. If the shaving
heads are dirty, you have to clean them. If the
shaving heads are damaged, you have to replace
them.
Foreign object on wireless charger
If there is a foreign (metal) object on the wireless
charger during charging, the notification symbol on
the wireless charger lights up. The wireless charger
switches off automatically and restarts 5 minutes
after the foreign object has been removed.
Do not place any foreign (metal) objects on the
wireless charger. Only use the wireless charger to
charge the shaver or another device (e.g.
smartphone) compliant with Qi charging.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
Charging takes approx. 3 hours. A fully charged
shaver has a shaving time of up to 60 minutes.