Explanation Of Symbols; Intended Use - Renkforce DS100-5M Mode D'emploi

2. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard,
e.g. from electric shock.
The exclamation mark in a triangle indicates important notes in these operating in-
structions that must be observed strictly.
The arrow symbol indicates that special advice and notes on operation are provided.

3. Intended Use

The slide scanner is used to digitise slides or negative film (for possible film types, see chapter
"Technical Data").
The integrated 5 mega pixel image sensor is used to photograph the templates like with a digital
camera. The pictures are either filed in the internal memory of the slide scanner or on an SD/
SDHC memory card (not enclosed, can be ordered separately) via a memory card slot.
An integrated LC display is used for control and easy operation.
Power is supplied either via the included mains adapter or via USB.
For reasons of safety and approval, the product must not be converted and/or changed by you.
Using the product for any other purposes than those described above may damage the product.
Improper use also may cause dangers such as short circuit, fire, electric shock, etc. Read the
operating instructions precisely and keep them. Only pass the product on to any third parties
together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
25