Renkforce DS100-5M Mode D'emploi page 39

No USB connection to a com-
puter
Images are not displayed in
playback mode
No image displayed
No video image on the con-
nected TV/screen
• Activate USB-mode; then an SD/SDHC memory card or
the internal memory can be read out.
• Always use a USB port of your computer or a USB hub
with a mains adapter. A USB port, e.g. at a keyboard
or a USB hub without a mains adapter, will not supply
enough power.
• The slide scanner can only display images that have
been scanned by it, but no other images.
• Connect the slide scanner to the power supply and
switch it on.
• If a cable is connected to the video output, the display is
switched off automatically.
• Select the right input at the TV/screen.
• Ensure that it is an analogue video input (CVBS/FBAS).
39