Renkforce DS100-5M Mode D'emploi page 28

• Never use the product immediately after it has been taken from a cold into a
warm environment. The condensation generated may destroy the product. The
mains adapter also involves the risk of a fatal electric shock!
Let the product reach room temperature before connecting and using it. This
may take several hours.
• The following unfavourable conditions are to be avoided at the place of installa-
tion and during transport:
- Dust or flammable gases, fumes or solvents
- Strong vibration, impact or blows
- Strong magnetic fields as present near machines or speakers
• It can be assumed that safe operation is no longer possible if:
- the device shows any visible damage,
- the device no longer works
- the device has been stored under unfavourable conditions for an extended
period of time
- if it has been subjected to heavy stress during transport
• When setting up and connecting the product, make sure that the cable is neither
bent nor squeezed and that no one can trip over it.
• Handle the product with care; impacts, shock or fall even from low heights will
damage it.
• Disconnect the product from the power supply if not used for an extended period
(e.g. during storage), pull the plug-in mains adapter from the mains socket.
28