Factory Reset; Firmware Version And Update - Studiologic Numa Compact 2 Mode D'emploi

Global edit

FACTORY RESET

FIRMWARE VERSION
AND UPDATE
20 Numa Compact 2 by Studiologic®
This function allows to make a complete Factory Reset, that
will cancel all user settings and reset all factory parameters to
the original status. Please note that this could make you lose
custom settings or programming and the function should be
done very carefully. To protect the user from unwanted reset,
a caution YES/NO message appears when trying to reset the
unit, allowing to confirm or not the factory restore.
To update the Firmware (upload) follow these steps:
- Download the firmware from
and save it in a known folder;
- Connect the instrument to the power and then to your
computer with the USB cable;
- Verify that is seen by your computer and selected as MIDI Out
device, in the related settings;
- Turn on the instrument while keeping pressed the A0 (first
white key on the left) and D1 (fourth white key from the left);
the display will show the message "Firmware Upload";
- Open any program able to "play" a midifile (i.e.
PC, QMidi for Mac etc);
MIDI-Ox:
- Open MIDI-Ox
- In the menu bar, choose Actions > Play MIDI... , MIDI Bar
will be opened;
- In the MIDI BAR windows, click on "Select MCI Port" button
and select Numa Compact 2;
- In MIDI BAR open the file you have downloaded;
- Press the play button and wait for the end of the
procedure;
- When the Numa Compact 2 display shows
"UPLOAD FINISHED", restart the instrument (off and on).
QMidi:
- Open QMidi;
- Select the firmware file you have downloaded;
- In the menu bar choose QMidi > Audio/MIDI settings and
select Numa Compact 2 as output device;
- In the main window press the play button and wait for the
complete procedure;
- When the Numa Compact 2 display shows
"UPLOAD FINISHED", restart the instrument (off and on).
www.studiologic-music.com
MIDI-Ox for