Vacuum Maintenance - Soniclean STV-1 Digital Stick Vacuum Mode D'emploi

VACUUM MAINTENANCE

PRIMARY FILTER MAINTENANCE
Once the dust bin is removed from the vacuum, rotate the dust
bin cap (A) counter clock-wise to access the primary filter (B).
We recommend checking the filter often and replacing it when
it becomes clogged to ensure optimal cleaning performance.
The primary filter can be washed using only warm water, and
should be left to dry for at least 24 hours before reinstalling it
into the vacuum. Do not use chemicals to clean the primary
filter.
CLEANING THE DUST BIN AND CYCLONE
To maximize suction performance, we recommend regularly
inspecting and cleaning the stainless steel cyclone (C) and the
dust bin (D). First, remove any large debris from the stainless
steel cyclone and dust bin using the maintenance brush that is
included with the vacuum. The stainless steel cyclone (C) can
be washed with warm water and should be left to dry for at
least 24 hours before reinstalling it into the vacuum. Do not use
chemicals to clean the stainless steel cyclone. A damp cloth
should only be used to clean the dust bin (D). DO NOT
submerge the dust bin under water or use any chemical
cleaning agents. Allow the dust bin to dry for at least 24 hours
before reinstalling it into the vacuum.
REASSEMBLING THE DUST BIN
Insert the stainless steel cyclone and then install the primary
filter. Once installed, align the unlock icon with the arrow on
the dust bin cap and rotate the cap clockwise to lock the dust
bin assembly. When the arrow points to the lock icon, the dust
bin has been successfully reassembled.
INSTALLING THE DUST BIN
Align the hinge on the dust bin with the hinge
on the vacuum cleaner. When the dust bin is
properly reconnected to the vacuum, you will
hear a click sound.
NOTE: Before performing any maintenance on your machine, please make sure that the
unit is turned off and the battery is removed from the vacuum.
11
VACUUM MAINTENANCE
A
B
C
D
REMOVING THE EXHAUST FILTER
The Soniclean STV-1 features a high efficiency exhaust filter. To access the exhaust filter
compartment, remove the exhaust filter cover by squeezing the two exhaust filter cover
release buttons.
EXHAUST FILTER MAINTENANCE
We recommend checking the exhaust filter often and replacing it when it becomes clogged
to ensure optimal cleaning performance. The exhaust filter can be washed using only warm
water, and should be left to dry for at least 24 hours before reinstalling it into the vacuum.
Do not use chemicals to clean the exhaust filter.
NOTE: Any damage to the powerhead or vacuum caused by improper maintenance or
the lack of maintenance is not covered by the warranty.
12