Using The Battery Pack; Vacuum Indicator Lights - Soniclean STV-1 Digital Stick Vacuum Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE BATTERY PACK

IMPORTANT: Charge battery completely before use
INSTALLING YOUR SONICLEAN BATTERY PACK
Slide the battery pack into the slot on the bottom of the vacuum. To release the
battery, pinch the release tab and slide the battery out of the vacuum.
CHARGING YOUR BATTERY PACK
Connect the battery charger (included) into the charge port on the battery pack, then
plug the charger into a wall outlet. The battery pack can be charged outside the
vacuum (A) or while installed in the vacuum (B).
BATTERY PACK INDICATOR LIGHTS
When the battery is charging outside the vacuum, the charge indicator light on the battery
pack will blink when charging and illuminate solid GREEN when fully charged. The battery
pack takes approximately 4 hours to fully charge.
7
BLINKING GREEN
CHARGING
SOLID GREEN
FULLY CHARGED

VACUUM INDICATOR LIGHTS

The Soniclean STV-1 Stick Vacuum features indicator
lights that inform the user of the current battery life,
charging status, and if there are any issues with the
vacuum.
CHARGING INDICATOR LIGHTS
As the battery pack charges (while installed in the
vacuum), the 3 LED indicator lights will first blink and
then illuminate in sequential order. All three lights will
become illuminated in solid green when the battery is
fully charged.
Low
Charge
POWER INDICATOR LIGHTS WHEN IN USE
As the battery pack discharges, the 3 LED indicator lights will gradually turn off in sequential
order. When less than 5% of the charge remains, ALL 3 indicators lights will blink.
Full
Mid
Low
Charge
Charge
Charge
NOTE: If the battery is sufficiently charged but ALL 3 indicator lights are blinking, this
means that your vacuum is sensing an issue such as a clogged filter, jammed brush, or
improper connection of the floor tool or upholstery/stair attachment tool. To fix this issue, turn
off the vacuum and remove the battery before checking for clogs and obstructions in the
vacuum and/or attachments. Once any clogs or obstructions are removed from the vacuum/
attachments, and the filter has been changed, reconnect the wand and attachments, insert
the battery and resume vacuuming. For maintenance instructions, please refer
to pages 10 - 13 of this manual.
NOTE: The battery pack, like all lithium-ion batteries, will naturally decrease in capacity
over time from the 100% capacity of a new battery pack.
NOTE: Allow battery to cool before charging.
Mid
Almost
Full
Charge
Full
Charge
Almost
ALL THREE LIGHTS ARE BLINKING
Empty
No Charge Remaining
8

Publicité

Table des Matières
loading

Produits Connexes pour Soniclean STV-1 Digital Stick Vacuum

Table des Matières