Receiver - QEO FL 510HV-G TRACKING Mode D'emploi

DUAL GRADE APPLICATION
Note:
It is recommended to use two receivers.
1. Let the laser complete the self-levelling procedure.
2. Set the value of the X axis. I.e.: X = 1 % / 50 m,therefore in 50 m = 50 cm.
Now set the value of the Y axis. I.e.: Y = 3 % / 20 m, therefore in 20 m = 60 cm.
Adjustment of the axes:
Turn the laser slowly until the receiver of the first axis (X) shows the on-level position again at a
distance of 50 m.
Empfänger
Empfänger
X-Achse

Receiver

Receiver
X axis
X-Achse
X axis
Empfänger
Empfänger
Receiver
Receiver
EN
41