API SALTWATER MASTER TEST KIT Mode D'emploi page 5

area. The closest match indicates the ppm (mg/L)
of ammonia in the water sample.
Rinse the test tube with clean water after each use.
What the Test Results Mean
In a new aquarium, the ammonia level may surge to
4 ppm (mg/L) or more, and then fall rapidly as the
biological filter becomes established. The ammonia
will be converted to nitrite (also toxic), then to nitrate.
This process may take several weeks. Use API STRESS
ZYME® to speed up the development of the biological
filter. In an established aquarium, the ammonia level
should always remain at 0 ppm (mg/L); any level above
0 can begin to harm fish. The presence of ammonia
indicates possible over-feeding, too many fish, or
inadequate biological filtration. The ammonia level is
not an indication of the nitrite level: nitrite is another
toxic waste material which must be tested separately.
Frequency of Testing
Regular testing is necessary to make sure the ammonia
level is safe. Aquarium water should be tested for
ammonia every other day when the aquarium is first
set up, and once a week after the biological filter has
been established (in about 4 to 6 weeks).
Detoxifying Ammonia
To detoxify ammonia, use API AMMO-LOCK® to instantly
"lock up" ammonia. AMMO-LOCK does not remove
ammonia, it simply converts toxic ammonia to a non-
toxic form, Ammonia test kits will still test positive
for ammonia, even though treating with AMMO-LOCK
has made it non-toxic. The biological filter will then
consume the non-toxic ammonia, converting it to nitrite
and then to nitrate.
Water Changes
Changing 25% of the aquarium water will reduce the
ammonia level. In an emergency, a daily water change
may be required over several days. Be sure to use a
water conditioner like API STRESS COAT® MARINE, when
tap water is used to make saltwater.
IRRITANT
Bottle #1 contains sodium salicylate.
May cause sensitisation by skin contact.
Keep out of the reach of children.
Avoid contact with skin.
Wear suitable gloves.
If swallowed, seek medical advice immediately and show this
container or label.
Bottle #2 contains sodium hydroxide and sodium hypochlorite.
Causes severe burns.
Contact with acids liberates toxic gas.
Toxic by inhalation, in contact with skin and if swallowed.
Danger of cumulative effects.
Keep locked up and out of the reach of children.
Keep away from food, drink and animal feedingstuffs.
In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
If contact lens is present, remove after 5 minutes, then
continue rinsing.
After contact with skin, wash immediately with plenty of
water.
Remove contaminated clothing.
Wear suitable gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
Do not mix with acidic materials.
5
CORROSIVE