Milwaukee M12 Manuel De L'utilisateur page 3

specificaTions
Cat. Input
No. Volts
2592-20 12 DC
symbology
Volts
Direct Current
To reduce the risk of injury, user
must read operator's manual.
Federal Communications
Commission
assembly
Warning
charger specified for the battery. For specific
charging instructions, read the operator's
manual supplied with your charger and battery.
Inserting/Removing the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the speaker.
To insert the battery, slide the pack into the body of
the speaker. Make sure it latches securely into place.
Fuel Gauge
The Fuel Gauge will show the remaining battery
charge for 2-3 seconds after turning on the speaker.
To signal the end of charge, 1 light on the fuel gauge will
blink slowly until the speaker shuts off automatically.
battery Pack Protection
To protect the life of the battery pack, the speaker will
shut off when the battery's charge becomes too low.
If this happens, remove the battery pack and charge
it according to the charger's instructions.
Connecting an Auxiliary Device
Connect an MP3 player, CD player, or other audio
device directly to the speaker using the stereo aux-
iliary jack AUX IN.
USb Power Outlet
This outlet can be used to charge a cell phone, power
an MP3 player or any other device that uses less than
2.1A of DC electrical current.
NOTE: Any device that uses more than 2.1 A of DC
electrical current will trip a self-resetting overload and
disable the output.
operaTion
Warning
electric shock, do not expose this speaker to
rain or moisture.
Turning On/Off and Connecting to Bluetooth
Press the Power/Bluetooth
speaker on and off.
USb Output USb Output
Volts Amps
5 DC
Recharge only with the
To reduce the risk of fire or
button to turn the
• If no Bluetooth device was previously paired,
Bluetooth pairing will begin automatically and the
indicator light will flash continuously.
• The speaker will continue to search for a signal for
10 minutes.
2.1
• To manually pair a device, turn on the speaker and
select "M12 Speaker" on the Bluetooth capable
device.
• Once paired, the speaker will automatically re-
connect to the same device when the speaker is
turned on.
• To pair the speaker to a different device, press
and hold the power/pair button for 3 seconds un-
til the indicator light flashes. It will then be in pair
mode and can be connected to a different device.
• Once the device has successfully paired with the
speaker, use the device controls to move through
tracks and control volume.
Volume
Use the
NOTE: To control the volume using the device's
controls, first turn the speaker volume to max (a
beep will sound).
Warning
always unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disas-
semble the tool, battery pack or charger.
Contact a milWaukee service facility for
ALL repairs.
Maintaining Tool
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
If the tool does not start or operate at full power
with a fully charged battery pack, clean the contacts
on the battery pack. If the tool still does not work
properly, return the tool, charger and battery pack,
to a MILWAUKEE service facility for repairs.
Warning
sonal injury and damage, never immerse your
tool, battery pack or charger in liquid or allow
a liquid to flow inside them.
Cleaning
Clean dust and debris from charger and tool
vents. Keep tool handles clean, dry and free of oil
or grease. Use only mild soap and a damp cloth
to clean the tool, battery pack and charger since
certain cleaning agents and solvents are harmful
to plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Never
use flammable or combustible solvents around tools.
Repairs
For repairs, return the tool, battery pack and char-
ger to the nearest service center listed on the back
cover of this operator's manual.
3
to increase or decrease the volume.
mainTenance
To reduce the risk of injury,
To reduce the risk of per-