Interlogix UVD-XP4DNR Guide De Démarrage Rapide page 4

OSD control pad
The onscreen display (OSD) control pad is a five-direction joystick that
provides the ability to manually control the camera functions.
OSD control pad
Table 1 lists the OSD control pad functions and describes their use.
Table 1: OSD control pad functions
Pad directions
Up
Left
Right
Down
Enter
Installation
Complete all the necessary programming before you install the
camera. This section provides information on how to install the camera
and adjust camera angle and focus.
WARNING: To reduce the risk of fire or electronic shock, do not
expose the camera to rain or moisture and do not remove the cover or
back.
EN 4
Description
Moves the cursor upward to select an item.
Moves the cursor left to select or adjust the parameters
of the selected item.
Moves the cursor to the right to select or adjust the
parameters of the selected item.
Moves the cursor downward to select an item.
Press the center of the control pad to display the Setup
menu. If the selected item has its own menu, press the
control pad to enter a submenu. Press the control pad for
2 seconds to save all settings and exit the Setup menu.
Quick Start Guide