Scope Of Delivery; Overview; Functional Description; Technical Data - Deltafox DG-ETI 7537 Traduction De La Notice D'utilisation Originale

Scope of delivery

Carefully remove the tool from the pack-
aging and check that the following parts
are complete:
• Engine housing with choppers
• Handlebar
• Central bar
• Mounting accessories for bar attach-
ment (4 screws and 4 wing nuts)
• Cable clamp
• Belt clip
• Instructions manual

Overview

1 Handlebar
2 Wing nuts
3 Screws
4 Central bar
5 Lower bar
6 Engine housing
7 Gears
8 Drive shaft
9 Chopper
10 Cable clamp
11 Mains connection cable
12 Release button
13 Start handle
14 Belt clip
15 hexagon bolts with self-securing
nuts
16 bolts with safety clips

Functional description

Your hand-operated electric garden hoe is
equipped with a maintenance free electric
motor and a gearbox with sump lubrication.
The device features four rotating, har-
dened choppers as a cutting unit, which
automatically penetrate into the ground.
The handlebar and central bar can be
folded in for better storage. Please refer to
the following descriptions for the function
of the controls.

Technical data

Electric Garden Hoe .......... DG-ETI 7537
Motor power input ........................... 750 W
Rated input voltage............ 230 V~, 50 Hz
Idling speed (n ) .......................... 430 min
0
Safety class ......................................... II
Degree of protection ..........................IPX4
Working width ...................... 365/190 mm
Max working depth ..............max. 200 mm
Number of tine wheels ............................ 4
Weight ............................................8.5 kg
Acoustic pressure level
(L ) ................... 80.8 dB (A), K
pA
Sound power level (L
Measured .... 89.3 dB (A), K
Guaranteed ............................ 93 dB (A)
Vibration at hand grip (a
......L: 0,62 m/s ; R 0,64 m/s
2
Noise and vibration values have been de-
termined according to the standards and
regulations named in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
GB
= 3 dB
pA
)
WA
= 3.12 dB
WA
) ...... ...................
h
; K = 1.5 m/s
2
-1
2
65