Using The Tap Function - Sony DPS-V55M Mode D'emploi

Using the TAP function

This function lets you change the value of certain time
related parameters or trigger an effect by tapping on the
ENTER (TAP) button.
The parameter which responds to the TAP function is
different for each effect, and not all effect have compatible
parameters. However, many time related parameters (such
as Delay Time) or parameters activated by a trigger (such as
Key Trigger) are designed to work with the TAP function.
(Refer to the separate Effect Parameter Guide for specific
information.)
The TAP function works the same in either play mode or
edit mode, but not can not be used when any other modes
(such as SYSTEM or SAVE) are active.
To use TAP with time related parameters
("Time" below)
Select a program containing a compatible effect, then tap
ENTER (TAP) repeatedly to enter the desired tempo.
The effector's tap editor measures the timing of the last two
taps an sets the corresponding parameter accordingly.
You can also change the ratio between your taps and the
actual parameter value (see page 18 for details).
To use TAP as a trigger ("Trigger" below)
Press ENTER (TAP) at the point where you want to activate
the effect.
Effects that can be adjusted using the TAP function.
Number Name
7 Rotary Speaker
9 Doppler
15 Stereo Delay
16 Ping Pong Delay
22 Stereo Panner
23 Haas Panner
31 Tremolo
32 Vibrato
34 Pitch Roller
36 Freeze
z
You can also use MIDI to control the TAP function
Data above 40H received on Control Change 04H produces
the same effect as pressing ENTER (TAP) on the front panel.
TAP type
Trigger
Trigger
Time
Time
Trigger
Trigger
Trigger
Trigger
Trigger
Trigger
15
GB