Personal Safety - Dexter 20VCIS3-190BL.1 Mode D'emploi

FR FR
2. SAFETY INSTRUCTIONS
ES ES
entering a power tool will increase the risk of electric shock.
PT PT
D. Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil,
IT IT
sharp edges or moving parts. Damaged or entangled cords increase
EL EL
the risk of electric shock.
E. When operating a power tool outdoors, use an extension cord
PL PL
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
RU RU
F. If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of an
KZ UA
RCD reduces the risk of electric shock.
KZ UA

PERSONAL SAFETY

RO RO
A. Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
BR BR
you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools
EN
EN
may result in serious personal injury.
B. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate conditions
will reduce personal injuries.
C. Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools that have the switch
on invites accidents.
D. Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury.
E. Do not overreach. Keep proper footing and balance at all times.
366