Help Information - Snap-on Equipment JohnBean B600P Manuel D'utilisation

3
38
4-26
4-27
4-28
Layout
4.7

Help information

Help information explains the current action and, in
the case of an error code, provides hints for remedy.
Display help information
— Press HELP key (Fig.4-26, Pos. 3).
The fi rst screen with help information appears, e. g. to
the screen RIM DATA ENTRY (Fig. 4-27).
— Press the HELP key once more to display the next
screen with help information.
Warning:
On pressing the HELP key in the last screen with help
information the display jumps to the fi rst screen again.
Quit help information
— Press the ESC key (Fig.4-15, Pos. 1).
4.8 Electromechanical stop
Refer to Fig. 4-28.
To perform an immediate stop:
• Press the Electromechanical stop button;
The electronic brake is activated to immediately stop
wheel shaft rotation, as well as any other balancer
(Lifter) automatic movement.
In the event of a stop due to an unexpected action by
the unit, reconstruct the steps taken:
Did the operator make an error or omit to do
something?
Correct the error and continue working. No special
procedure is required.
Did the unit do something unexpected?
• Read the relevant chapters again.
• Prepare the unit for a restart:
switch the unit off and on again.
• Carefully repeat the commands following the
indications in the operator's manual.
• If the unit does not function correctly,
WARNING: PREVENT ANY FURTHER USE OF THE
UNIT.
• Call the service team immediately.
......